二四六开奖结果现场直播

Hello, welcome to Shenzhen Tailianda Technology official website!

Shenzhen Tailianda Automatic Lock Screw Machine Manufacturer

Leader in industrial automatic tightening technology
Telianda National Service Hotline: 13530218024

Recommended Products

  • Qili speed automatic lock screw electromechanical batch shaft Qili speed automatic lock screw electromechanical batch shaft
  • Screw machine feeder_1V4 screw machine feeder Screw machine feeder_1V4 screw machine feeder

contact us

Hand-held automatic lock screw machine

Location: 二四六开奖结果现场直播 > Products > Handheld Automatic Lock Screw Machine
  • 3.jpg

Hand-held push-pull automatic locking screw machine

product description:

Tailianda hand-push type automatic lock screw machine has a wide range of applications, easy operation, and lock payment efficiency up to 0.8 seconds per screw! The screw is sent to the batch head by blowing air. Just align the electric batch with the position to be locked and gently press it down to complete the lock payment, eliminating the need for reciprocating actions such as self-retrieving screws by hand; Take a hand to support the product, the efficiency is more than doubled, and one labor can be saved.

Order hotline 13530218024


Factory direct sales


Cost savings of 120,000 yuan / year / unit


Support non-standard customization


3,915 units shipped in 2018


one year warranty






Product definition:

The push-pull automatic locking screw machine is composed of three parts: feeding system, distribution system and lock payment system. All actions of the screw lock payment are controlled by the built-in program of the device, and the employee only needs to align the batch mouth with the position to be locked. The feed is completely replenished automatically by the distribution system. All system components of this machine are customized according to the actual screw specifications, the angle and size of the position to be locked, etc., and are non-standardized components.

working principle:

The push-pull type automatic locking screw machine uses the turbine method to feed, screen and sort the special-shaped screws; transfer to the screw distribution system through the vibration guide; allocate the sorted screws through the distribution system; send the screws to the lock mouth by tracheal pressure , The batch knife pushes the screw out, and the batch knife with the screw aligned with the screw hole position.

Advantages of automatic lock screw machine :

1. Efficient and labor-saving: Because it completely eliminates a series of repetitive actions such as manual movement, grasping screws, moving, and screw alignment screwdrivers, there is no waiting time, just align the screw holes to lock the screws. One screw is locked in one second; one or two workers can reduce the screw lock operation, realize semi-automatic production, reduce the labor intensity of workers, and improve production efficiency.

2. Easy operation: One hand can be freed to support the product to be locked when screwing; if it is a small product, a positioning jig can be omitted.
3. Special-shaped screw selection: Turbine feeding, low noise, and small damage to the screw surface. Feeding straight vibration is fast and stable. The special-shaped screw can be automatically selected on the straight vibration to ensure that the material sent to the feeder from the front end of the straight vibration is non-anomalous. The lack of direct vibration will automatically alarm.
4. Stability without jamming: During the lock payment process, a screw is normally locked, and the screw automatically sends 1 screw to the mouth. If the torque is not reached, the screws will not be sent to the batch nozzle, and there will be no screwing due to repeated feeding; even if the screwing is caused by bad screws, non-professionals can solve the problem of carding within a few seconds.
5. Clean and clean: Because the action of removing the screw by hand is omitted, the screw will not stain the screw due to the secondary pollution of the product due to the stain generated when the screw is taken by hand, and it will be more rusty.
6, the machine is durable: key components are selected from high-quality alloy steel materials and undergo special heat treatment. All pneumatic and electrical components are selected from original parts to ensure that millions of screws work without failure.
7, intelligent production: production schedule is in place, eliminating the need for recruitment, training and so on. Realize automated production and establish the image of modern production

Related Products

  • Qili speed automatic lock screw electromechanical batch shaft

  • Screw machine feeder_1V4 screw machine feeder

  • Hand-held push-pull automatic locking screw machine

Ordering Products:

Contact person
mobile phone number
e-mail