二四六开奖结果现场直播

Hello, welcome to Shenzhen Tailianda Technology official website!

Shenzhen Tailianda Automatic Lock Screw Machine Manufacturer

Leader in industrial automatic tightening technology
Telianda National Service Hotline: 13530218024

contact us

Technical Support

Position: 二四六开奖结果现场直播 > News > Technical Support

Reasons to purchase and use of automatic lock screw machine

来源:原创 浏览次数:2889 Time: 2017-04-29 09:17:36 Source: Original Views: 2889


Reasons to buy fully automatic locking screw machine :

1. High efficiency, eliminating at least half of the labor, because it completely eliminates the manual operation process, such as grasping the screw, moving, screwing the screwdriver and other manual operations, there is no waiting time at all, only Aligning the screw hole locking screws, usually one screw can be locked in 1 second, which can reduce at least 1 or 2 manual screw locking operations, realize semi-automatic production, reduce manual labor intensity, and improve production efficiency;

2. Convenient, you can free up one hand to support the product to be locked when screwing. If it is a small product, you can save the positioning fixture.

3. Special-shaped screw selection, using turbo feeding, low noise, little damage to the surface of the screw, fast and stable feeding, straight-shaped vibration can automatically select special-shaped screws to ensure that the material sent to the dispenser before the direct-vibration feeding is non-anomalous. , The direct vibration lack of material will automatically alarm;

4. Stable without jamming. During the lock payment process, a screw is normally locked, and the screw automatically sends 1 screw to the mouth of the batch. If the torque cannot be reached, the screw will not be sent to the mouth of the batch. Material screw phenomenon, even if the material is jammed due to bad screws, non-professionals can solve the problem of material jam within a few seconds;

5. Clean, because manual work is eliminated, no manual grasping of the screws is needed, and the second stain of the product will not be contaminated by the stains generated when grasping the screws, and the hands will sweat and contaminate the screws, which will cause other screws to be born. rust.

6. The machine is durable. The key components are selected from high-quality alloy steel materials and undergo special heat treatment. All pneumatic and electrical components are made of original components to ensure that millions of screws work without failure.

7. Intelligent production, the production schedule is in place, eliminating the need for recruitment, training, etc., to achieve fully automated production, and establish a modern production image.

Instructions:

1. Turn on the power, connect the air source, and adjust the torque of the electric batch;

2. Pour the screws into the screw bin;

3. Before locking the screw for the first time, press the power switch twice in succession, and the cylinder pushes a screw down.

4. Hold the electric screwdriver in one hand, hold the screw workpiece to be locked, press the locking screw under the screw hole;

5. After the electric batch reaches the preset torque, lift the electric batch and lock the second screw;

6. Lock the next screw and press directly on the product.

Previous: How to use the hand-held automatic lock screw machine

Recommended information

Hot products

  • Qili speed automatic lock screw electromechanical batch shaft

  • Blowing type 1 two-axis automatic lock screw machine

  • Fixed double platform four axis automatic lock screw machine