First, the selection of automatic locking screw machine : The first step is to check whether it can be screened: in actual production, there may be flashes, flat heads, big heads and other special-shaped screws. Grasp a variety of non-standard-shaped screws and put them in the hopper.If the screw machine can automatically screen out special-shaped screws during operation, no jamming will occur, that is, one of the conditions for a good screw machine is met. The second step is to check whether it can be refilled. When we carried out the first step, after the screw machine automatically screened a shaped screw, there would be a gap; if the system can replenish in time, there will be no gap. Yes.This is the second condition of a good screw machine. The third step is to check whether there are floating teeth. In order to make the special-shaped screws pass smoothly, some manufacturers have enlarged all the channels. This will make it difficult for the electric screwdriver to align with the cross slot of the screw, cause the floating screws of the locking screw, and increase defective products. The fourth step is to check whether the feeding is repeated: sometimes the previous one is not locked. When you touch the signal lightly, another screw will be conveyed, that is, a double screw.
Second, the benefits of automatic screw machine: 1. Improve production efficiency, reduce workers and save costs. 2. Without taking the screws by hand, the screws are automatically fed to the mouth of the batch. 3. With one-handed locking operation, the screw can be completed easily by pressing down the piezoelectric batch. 4.Efficiency up to 60 tablets / minute 5. The screw will not be contaminated again. 6. Reduce the labor intensity of workers. 7. LCD screen can count and alarm. 8. Improve the company's unified image.