Any mechanical equipment will inevitably have some failures during use. There is no way to avoid it. Even Microsoft, which has experienced decades of wind and rain, cannot guarantee that windows will not be abnormal, and the automatic lock screw machine is the same. A company can guarantee 100% perfection. Since it cannot be avoided, we need to know how to avoid and solve it.
Let's talk briefly about the automatic lock screw machine:
1. The automatic lock screw machine cannot be turned on
Solution: The screw machine cannot be turned on. The main reason is that the power supply is not powered.
There is no power from the power supply. Check whether the socket is loose, the switch is connected, the power cord is damaged, and the fuse is burnt.
2. Automatic lock screw machine sliding tooth floating lock;
For abnormalities such as sliding tooth floating locks, check whether the torque setting is OK; check whether the screws meet the standards;
The screw torque is set according to the screws during commissioning. If the screws are replaced in subsequent operations, there will be some impact.
3. The screw lock does not go in
Solution: The screw lock does not go in, first determine whether the height of the pad is reasonable, and then check whether the torque is too small;